Sennsors for stainless steel products

GW 041 A, GW 043 A

GW 041 A, GW 043 A

Download

Description

The sensor is intended for installing in stainless-steel sinks or urinals with wall thickness 1.5 mm maximum. It responds to the presence of an object in the scanned zone by an instantaneous start of water flow. After leaving the scanning zone, the water flow is stopped within approximately 1 second. The sensor is intended for a single water inlet. The electrical supply can be provided by an AC 20 V supply source (marking -Z) or from a 6 V battery (marking -X). The circuit contains a time fuse breaking the water flow after 1 minute approximately The sensor sensitivity and time fuse are set by a remote controller GW 081 (not included in the shipment).
The product is intended for manufacturers of sanitary equipment (wash-basins, sinks, urinals).

Parameters

Range 0,15 – 0,3 m
Work pressure 0,1 – 0,8 MPa
Water temperature max. 70° C
Power supply:
Supply voltage AC 20 V
Power consumption 1,2 W (at rest)
10,7 W (at switching on)
Electrical battery:
Supply voltage 6 V
Service life 5 years approximately (at 200 switchings a day)

Recommended accessories

GW 091Z Supply source AC 20 V to supply max. 2 pcs of sensors at once
GW 092Z Supply source AC 20 V to supply max. 4 pcs of sensors at once
GW 081 Remote control for setting up of the sensitivity and duration of time fuse
CRP 2 Lithium battery 6 V

Accessories

Example of manufactured types

  • GW 041AZ – sensor for sinks and wash-basins with supply from a source, an electromagnetic valve inlet and outlet 3/8“
  • GW 041AX – sensor for sinks and wash-basins with supply from a battery, an electromagnetic valve inlet and outlet 3/8“
  • GW 041BZ – sensor for sinks and wash-basins with supply from a source, an electromagnetic valve inlet and outlet 1/2“
  • GW 041BX – sensor for sinks and wash-basins with supply from a battery, an electromagnetic valve inlet and outlet 1/2“
  • GW 043AZ – sensor for sinks and wash-basins with supply from a source, an electromagnetic valve inlet and outlet 3/8“
  • GW 043AX – sensor for sinks and wash-basins with supply from a battery, an electromagnetic valve inlet and outlet 3/8“
  • GW 043BZ – sensor for sinks and wash-basins with supply from a source, an electromagnetic valve inlet and outlet 1/2“
  • GW 043BX – sensor for sinks and wash-basins with supply from a battery, an electromagnetic valve inlet and outlet 1/2“