Spare Parts and Accessories
GW 091Z
Description
Supply source to supply max. 4 pcs. of urinal or toilet flushings or 2 pcs. of wash-basin or shower control units.
Parameters
| Supply voltage | 230 V; 50 Hz |
| Output voltage | AC 20 V |
| Power | 11 W permanently 25 W short-term (5 minutes on / 15 minutes of) |
| Fuse | Fuse T 0,08 A ( primary winding of transformer) |
| Protection degree | IP 55C |
| Mechanical dimensions | 130x108x59 |
GW 092Z
Description:
Supply source to supply max. 7 pcs. of urinal or toilet flushings or 4 pcs. of wash-basin or shower control units.
Parameters
| Supply voltage | 230 V; 50 Hz |
| Output voltage | AC 20 V |
| Power | 18 W permanently 40 W short-term (5 minutes on / 15 minutes of) |
| Fuse | Fuse T 0,125 A ( primary winding of transformer) |
| Protection degree | IP 55C |
| Mechanical dimensions | 130x108x75 |
GW 081
Description
The controller is used to set the sensitivity and time fuse of optical sensors.
Parameters
| Supply of GP11A | 6V alcalic battery (10 x 16 mm) |
| Range min. | 0,4 m |
| Dimension of the controller | 14 x 30 x 70 mm |
The sensitivity is set up by putting the hand at the required distance along the sensor axis. The controller is aimed at the sensor window and pressed for 1 second approximately. The LED diode inside the sensor indicates a reception from the remote controller and after a few moments it flashes and goes out – the distance setting is carried out. After a following flashing and going out the sensitivity setting is completed.
The time fuse prevents a long water flowing. It is set up by a permanent pressing of a push button of the remote control aimed towards the sensor. The diode in the sensor window goes out after about 5 seconds. This is followed by a double flash of this diode. Each double flash means time fuse extension by 30 seconds. Example: To set the time fuse to two minutes, the push button of remote control is released after four double flashes of LED diode in the sensor window.
Spare Parts
CRP 2 Battery
Description:
- Lithium battery 6 V
- Service life 5 years approximately (at 200 switchings a day)
- A case for the battery can also be ordered
Valve for sensors with a battery
Description
- Valve for all types of sanitary technology manufactured by Guliwer electronics s.r.o. supplied from a battery
- Maximum temperature of processed media 60 °C
- Connection G1/2“ / G1/2“
Valve for urinals
Description
- For use with all types of flushings
- Supplied from supply sources – GW 09x
- Maximum temperature of processed media 60 °C
- Connection G1/2“ / G1/2“
Valve for
arms / sinks
Description
- For use for all Guliwer electronics s.r.o. applications, preferably for drinking water – hygienic attestation
- Supplied from supply sources – GW 09x
- Maximum temperature of processed media 90 °C
- Connection G1/2“ / G1/2“
W 021
Description
Control electronics of flushings responds to presence of a person standing in the scanned zone in the distance up to 0,5 m for at least 7,5 second by flushing after leaving. The time to flushing is adjustable within 1 – 15 seconds.
Intended for mounting into stainless steel covers of flushings: Tesla Lanskroun W017 and Guliwer electronics s.r.o. GW 021.
Parameters
| Supply voltage | AC 20 V (DC 24 V – Tesla) |
| Power | 1,2 W (at rest) |
| 10,7 W (valve switched on) | |
| Range | 0,5 m |
W 031Z
Description
Control electronics of showers responds to presence of a person standing in the scanned zone at the distance up to 0,5 m by releasing water after 1 second. The water flows for further 3 seconds after the person leaves.
Intended for mounting into stainless steel covers of flushings: Tesla Lanskroun W038 a Guliwer electronics s.r.o. GW 011.
Parameters
| Supply voltage | AC 20 V (DC 24 V – Tesla) |
| Power | 1,2 W (at rest) |
| 10,7 W (valve switched on) | |
| Range | 0,5 m |