Fuel sensor GW 7-0001
Features – the Fuel Sensor is equipped with suction and returning of fuel.
Material – antimagnetic stainless steel.
The basic construction component is a flange to which tubes are welded. The measuring system is placed inside the central tube of 12mm diameter. The float with a magnet moves along this tube and operates the magnetic switches. As a result, the output resistance value depends on the fuel level in the tank.
Two smaller tubes of 8mm diameter serve for suction of fuel (or its returning) from/to fuel pump. A filter is provided to prevent intrusion of rough impurities from the return pipe to the suction pipe. Ends of these tubes above the tank are provided with a reinforcement to secure a reliable connection of hoses.
The Fuel Sensor is intended for mounting to tanks with a 40mm hole.
The use of the fuel gauge must be specified in the order.
|Max. current||150 / 200||mA|
|Operating temperature||-40°C to +85°C||°C|
|Label||Producer, product code, direction of fuel flow, date (or date code)|
|Service life||1 000 000||cycles|
|Protection degree||IP 68 (Inner part)||IP 67 (External part)|
Limit parameters for specifying new types by the customer
|Max. length H||900||mm|
|Measuring circuit resistance||50 – 100 000||ohm|
|Minimum measurement step||16||mm|
|Max. measured height L1||30||mm|
|Min. measured height L0||H-30||mm|
|Connector||Any type of cable connector|